产品中心
Products
| 25+30+30氟塑料高压物理发泡挤出线 High pressure Fluoroplastic Physical Foaming Extrusion Machine |
|
|---|---|
| 设备型号.Equipment Model | Ф25+Ф38+Ф30 |
| 完成外径Finished OD | Ф0.9-3.8mm |
| 导体范围 Conductor scope | Ф0.5-1.8mm |
| 适应发泡料Applicated material | FEP |
| 内层/外层Internal/External material | FEP |
| 线速度 Wire speed | MAX150m/min |
| 注气系统压力 Air pressure | MAX 65Mpa |
| 适应气体 Applicated gas | 氮气Nitrogen |
| 氮气纯度 Nitrogen purity | 99.99% |
| 注气方式Gas injection method | 主动加压式Active pressurization |
| 注气输出压力精度 Gas pressure output deviation | ±0.1Mpa |
| 储气量 Gas storage output | MAX1.5L/800bar |
| 发泡流量范围Foaming flow scope | 0.5-150L/h |
| 发泡度 Degree of foaming | 10-60% |
| 发泡类型Foaming type | 皮+泡+皮/泡+皮insulation+foaming+insulation layer foaming layer+ insulation layer |
| 导体范围 Conductor Range | Ф0.5-1.8mm |
| 放线 Pay-off bobbin OD | Ф300-400mm |
| 收线Take-up bobbin OD | Ф300-500mm |
| 控制方式Control type | IPC工业计算机 IPC industrial computer |
| 驱动方式Drive motor | 伺服电机Serve motor |